Benefon TWIG INBOX Uživatelský manuál Strana 1

MPTP | Copyrights and limitation of liability 1Mobile Phone Telematics Protocolfor TWIG GSM/GPS productsVersion 3.25Licensed to:Twig Com Ltd., SALO,

MPTP | MPTP commands 102.2.3. Emergency cycleThe term emergency cycle refers to an automated sequence of actions taken when the end user has press

MPTP | MPTP commands 100Setting IDField Description Range2601 White list number 1 Defines the CALL/SMS number0-24 numbers2602 WLN 1 LOQ Defines the

MPTP | MPTP commands 1012643 WLN 5 TRG Defines the WLN 5 SMS tracking request permission Default=10=denied1=allowed2644 WLN 5 CALL Defines the WLN 5

MPTP | MPTP commands 1022691 White list number 10 Defines the CALL/SMS number0-24 numbers2692 WLN 10 LOQ Defines the WLN 10 SMS location request pe

MPTP | MPTP commands 1032733 WLN 14 TRG Defines the WLN 14 SMS tracking request permission Default=10=denied1=allowed2734 WLN 14 CALL Defines the WL

MPTP | MPTP commands 104Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2800 Ambe

MPTP | MPTP commands 105Depending on the authorization of the Control Centre which requested the action, the action may be performed autom

MPTP | MPTP commands 106For the format of most of the persistent setting reports cf. 4.6. Command is of course replaced with !PSR.4.9. Reset termina

MPTP | MPTP commands 107

MPTP | MPTP commands 113. A Control Centre wants to activate the telematics services of the Mobile Telematics Terminal.Examples: (1) The customer of

MPTP | MPTP commands 123. MESSAGE CONSTRUCTION AND INTERPRETATIONAs mentioned earlier, MPTP messages are sent between parties as specially formatted

MPTP | MPTP commands 13Telematics Terminal.If for some reason messages which have exclamation and/or question mark as first character do not work in

MPTP | MPTP commands 14gpa, position is aquired from GPS, but the timestamp is updated, since no movement is detected with motion sensor after l

MPTP | MPTP commands 15The precision of the position given in the Position field. The unit for the precision is always meters. The range of the fiel

MPTP | MPTP commands 16If data needed for a data field is unavailable, the field is commonly filled with hyphen characters (-, Unic

MPTP | MPTP commands 17The exact meaning of each field, along with the typical actions taken on reception of the message, is given for each command

MPTP | MPTP commands 183.7. Table of MPTP commandsFor the table of MPTP commands and products that support them cf. Table of MPTP commands.pdf.For t

MPTP | MPTP commands 194. MPTP COMMANDSThis chapter lists each MPTP command, categorized according to their usage. For each command, the following i

MPTP | Copyrights and limitation of liability 2LIMITED LICENSE AGREEMENTLicensee:Licensee contact person:The licensor, Twig Com Ltd., Meriniitynkatu

MPTP | MPTP commands 20Supported Benefon/TWIG instruments and SW versions: Send ReceiveTwig Discovery SW CD1D.02.002.00069, CD2D.02.011.00000• •Twig

MPTP | MPTP commands 21acquired from the GPS before sending a report. Old software versions will generally always send the last known position.Comma

MPTP | MPTP commands 224.1.2. Position report (!LOC)MTT → CCThe position report command is sent by a Mobile Telematics Terminal as a sole response t

MPTP | MPTP commands 23Command formatLength: 87...151 charactersCommand*Part number*Mode*Battery level*Position source*Position format*Position*Time

MPTP | MPTP commands 24*) cf. section 3.1 for description of these fields.The Data field includes beacon data if position format is 3. Some TWIG ins

MPTP | MPTP commands 25• Stop trigger :The tracking process is stopped when this condition is met. Typical stop triggers include a specific number

MPTP | MPTP commands 264.2.1.1. Simple tracking request: interval, minutes (?TRC)CC → MTTThe simple tracking request command is sent b

MPTP | MPTP commands 27• Track One, Track Pro, Trackbox, TrackKeeper, Seraph, Twig Locator :Depending on the authorization of the Control Ce

MPTP | MPTP commands 28Supported Benefon/TWIG instruments and SW versions: Send ReceiveTwig Hunter SW CD1H.02.002.00000 Hunter 1.0.3•Twig Discovery

MPTP | MPTP commands 29have been sent.For information on how the receiving instrument interprets these parameters, cf. section .4.2.1.3. Simple trac

MPTP | Table of contents 3TABLE OF CONTENTS1. INTRODUCTION...

MPTP | MPTP commands 30Cf. section 4.2.1 for information on determining the recipient of the reports sent by a tracking process.Command for

MPTP | MPTP commands 314. NOT AVAILABLE 5. NOT AVAILABLE 6. NOT AVAILABLE 7. Endless tracking :The tracking process sends reports

MPTP | MPTP commands 32• Interval : Interval for sending reports while outside the area, in minutes.• Stop trigger : Arrival at area; i.e. rever

MPTP | MPTP commands 33ReceptionDepending on the authorization of the Control Centre which sent the request, a new tracking process may be created o

MPTP | MPTP commands 34relation to the tracked area. Thus, this parameter is also relevant for Methods 2, 3 and 4.4.2.1.4.2. Trigger type 1: stoppin

MPTP | MPTP commands 35Command formatLength: 14…22 charactersCommand*Trigger typeService stateInterval(Limit)Unused(Allowed value)Numberof reports(T

MPTP | MPTP commands 36• Stop trigger : Time limit.The tracking process is stopped when it has been running for a specified time. The time limit i

MPTP | MPTP commands 37Time limit Stop trigger condition: the tracking process is stopped after it has been running for the time set in this field.1

MPTP | MPTP commands 38Command formatLength: 25…29 charactersCommand*Trigger typeService stateInterval(Limit)Unused(Allowed value)Stopping date and

MPTP | MPTP commands 39• Start trigger : None.The tracking process is started as soon as it is created.• Interval The process will send tracking

MPTP | Table of contents 44.3.2. Acknowledgement to condition check permission request...594.4.

MPTP | MPTP commands 40Interval Time between sending of tracking reports, in minutes.1…65534 (min)4.2.1.4.6. Trigger type 9: anchor trackingCC → MTT

MPTP | MPTP commands 41The special fields of the command are as follows: Field Description RangeTrigger type Trigger type of complex tracking reques

MPTP | MPTP commands 42Command formatLength: 8…9 charactersCommand*Trigger typeService state4 1 1…2 1 1?TRG _ 0 _ 0*) cf. section 3.1 for descriptio

MPTP | MPTP commands 434. Speed tracking :For future extension.5. Report at date and time :For future extension.6. Polygonal area tracking :Fo

MPTP | MPTP commands 44The tracking process has the following properties:• Start trigger : None.The tracking process is started as soon as it is c

MPTP | MPTP commands 45be used; otherwise the process will not be activated.Interval Time between sending of tracking reports, in seconds.1…65534 (s

MPTP | MPTP commands 46*) cf. section 3.1 for description of this field.The special fields of the command are as follows: Field Description RangeTri

MPTP | MPTP commands 47Twig Protector SW CG1P.01.001.0000•Sending• Track One, Track Pro, Trackbox, TrackKeeper, Seraph, Twig Locator :This command

MPTP | MPTP commands 48The special fields of the command are as follows: Field Description RangeTrigger type Trigger type of the tracking process. A

MPTP | MPTP commands 49Command formatLength: 90...104 charactersCommand*Part number*Trigger typeService stateMode*Battery level*Position source*Posi

MPTP | MPTP commands 51. INTRODUCTIONMPTP (Mobile Phone Telematics Protocol) is a protocol developed by Twig Com Ltd. . It is a key for building pr

MPTP | MPTP commands 50Reception• Twig Hunter :Upon receiving a tracking report command, Twig Hunter will notify the user and update the position

MPTP | MPTP commands 51Speed*Heading*Message number7 1 6 1 3…9081km/h _ 114deg _ 3/10Trigger type 4Length: 92...108 charactersCommand*Part number*Tr

MPTP | MPTP commands 52Message number The message number of the report and the total number of messages to be expected. The first number is the mess

MPTP | MPTP commands 53Trigger type 7Length: 90...104 charactersCommand*Part number*Trigger typeService stateMode*Battery level*Position source*Posi

MPTP | MPTP commands 544.3. Condition check commandsCondition check is a function which enables monitoring a target’s condition without having to sp

MPTP | MPTP commands 55SendingThis command can be sent by a condition check process. Cf. section 4.3 for more information.Command formatLength: 94..

MPTP | MPTP commands 56Passcode Passcode entered into the query by the user.The code is not verified locally. Any verification needs to be done base

MPTP | MPTP commands 57Speed*Heading*Queries missedPasscode7 1 6 1 1…5 1 0…4081km/h _ 114deg _ 1 _ 8725*) cf. section 3.1 for description of these f

MPTP | MPTP commands 58Command formatLength: 12 charactersCommand*ApprovalRequest commandTrigger type4 1 1 1 3 1 1?ACK _ 1 _ CND _ 1*) cf. section 3

MPTP | MPTP commands 59Starting the emergency cycleThe emergency cycle is started when the user of a Mobile Telematics Terminal presses the emergenc

MPTP | MPTP commands 62. OVERVIEW OF THE SYSTEMMPTP messaging takes place in the GSM network using specially formatted SMS messages. This chapter de

MPTP | MPTP commands 604.4.1. Emergency report with text (!EMG)MTT → CCThis emergency report command may be sent by a Mobile Telematics Terminal dur

MPTP | MPTP commands 61The special fields of the command are as follows: Field Description RangeMode Cf. section 3.1 for description of this field.S

MPTP | MPTP commands 62Command formatLength: 4 charactersCommand*4?EMG*) cf. section 3.1 for description of this field.4.5. Status and information c

MPTP | MPTP commands 63Supported Benefon instruments and SW versions: Send ReceiveTWIG Locator SW CL1L.06.008.0000•Sending• TWIG Locator :A repo

MPTP | MPTP commands 64text report. Some status codes can have a fixed, predefined string associated with them. For Trackbox, a status text can be d

MPTP | MPTP commands 654.5.3. Device information report (!INF)MTT → CCThe device information report command can be sent by a Mobile Telematics Termi

MPTP | MPTP commands 66*) cf. section 3.1 for description of these fields.The special fields of the command are as follows: Field Description RangeS

MPTP | MPTP commands 67In Twig family this field contains ‘-‘ because the data is not available.Failure code Internal code indicating reason for bat

MPTP | MPTP commands 68RadiusMethodInterval1…4 1 1 1 1…51000 _ 0 _ 15The special fields of the command are as follows: Field Description RangeIndica

MPTP | MPTP commands 69Method Method of anchor tracking, as described above:0: report while outside the area1: report while inside the area2: report

MPTP | MPTP commands 72.1.3. Authorisation and access rightsIt is desirable to limit the parties from which MPTP messages used for controlling and m

MPTP | MPTP commands 70Field Description RangeType Type of the automatic status reporting process.Currently there is only one type of process and 0

MPTP | MPTP commands 71Command formatLength: 8 charactersCommand*TypeService state4 1 1 1 1?ASR _ 0 _ 0*) cf. section 3.1 for description of this fi

MPTP | MPTP commands 72Command formatType 0Length: 21...42 charactersCommand*Part number*TypeStatusBattery level*Sent messagesAccessory data4 1 5 1

MPTP | MPTP commands 73Supported Benefon/TWIG instruments and SW versions: Send ReceiveTWIG Protector SW CG1P.01.001.0000•ReceptionUpon receiving a

MPTP | MPTP commands 74Command*Part number*Software versionGPS software versionIMEIGSM module software version4 1 5 1 16 1 16 1 16 1 20!SIR _ 01/01

MPTP | MPTP commands 75The appearance of the message is normally accompanied by playing the message reception tone and using lights and vibrat

MPTP | MPTP commands 76Forced vibration Use of vibration upon arrival of the message:- Use default setting for vibration.0 Do not use vibration.1 Us

MPTP | MPTP commands 77Please note, that some configurations require the unit to be restarted to get effect. In some devices the restart can be done

MPTP | MPTP commands 782nd emergency centre recordSlot numberCallrecipientCallingEm. reportrecipientReporting…1 1 0…41 1 1 1 0…41 1 1 …5 _ +35812345

MPTP | MPTP commands 79Em. report recipientEmergency report phone number for the Nth record.valid phone numbersReporting Defines whether an emergenc

MPTP | MPTP commands 8• All requests from unauthorized target entries require the user to accept their processing by confi

MPTP | MPTP commands 80be overwritten.Authorized number NAuthorized phone number N. valid phone numbersAs up to 20 authorized numbers can be defined

MPTP | MPTP commands 814.6.4. Setting 0300: GPRS Telematics settingsThis command is used to set the User ID, Service number settings and GPRS use an

MPTP | MPTP commands 82User ID Defines the ID number of the device. Number must be same as used in the backend. Typically own phonenumberIf the numb

MPTP | MPTP commands 83Supported Benefon/TWIG instruments and SW versions: Send ReceiveTwig Discovery Pro SW CD??.02.000.00000•Twig Locator SW CL??.

MPTP | MPTP commands 84not allowed to be chaged in the device by default and only factory preprogrammed values are used. This applies specifically t

MPTP | MPTP commands 85Command formatCommand*Part number*Setting IDPWR On/Off modeStart up time, yymmddhhmmss Pwr ON Interval, minsPwr OFF Delay, mi

MPTP | MPTP commands 864.6.8. Settings 2001–2009 -General SettingsDefines the General instrument related settings. Settings can be sent in same mess

MPTP | MPTP commands 872006MPTP header translationDefines if MPTP command headers are changed from ? to Q and ! to E. Needed in some countries due t

MPTP | MPTP commands 884.6.10. Settings 2101–2105 –Information messagingDefines the Automatic status messaging use. The INF-reply is defined in 2.2.

MPTP | MPTP commands 89Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2201 SOS K

MPTP | MPTP commands 9The MPTP commands, which can be used for realisation of these scenarios, are described in section 4.1.2.2.2. TrackingThe term

MPTP | MPTP commands 90Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2211 Displ

MPTP | MPTP commands 91Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2301 Event

MPTP | MPTP commands 922331 Event type Defines the type of event number 41=SMS2=call2332 Number Defines the recipient 4 number 0-24 numbers2333 Name

MPTP | MPTP commands 932371 Event type Defines the type of event number 81=SMS2=call2372 Number Defines the recipient 8 number 0-24 numbers2373 Name

MPTP | MPTP commands 94Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2400 MPTP

MPTP | MPTP commands 954.6.15. Settings 2430–2431 –TWIG SOS Post emergency cycleDefines the General TWIG SOS post emergency cycle settings . Setting

MPTP | MPTP commands 96Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2440 Alert

MPTP | MPTP commands 97Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2500 GPRS

MPTP | MPTP commands 98Check Command format from 4.6.8The special fields of the command are as follows: Setting IDField Description Range2550 ASSIS

MPTP | MPTP commands 99Check Command format from 4.6.8The special fields of the command are as follows: